Back to Rooms

How Do You Protect Floors From Furniture?

How Do You Protect Floors From Furniture?
Cleaning Guides Team 17 February 2026

Furniture damages floors in three distinct ways, and the felt pad that solves one does nothing about the others. Scratching comes from movement across the surface. Indentation comes from sustained weight on a small area. Staining and discolouration come from materials reacting with the floor, particularly rubber on vinyl.

What causes most of the scratching?

Dining chairs, without much competition. They are moved several times a day, dragged rather than lifted, and often have small hard feet. A dining area on a hard floor will show wear long before the rest of the room.

The remedies are felt pads on every leg, checked and replaced regularly, and a habit of lifting rather than sliding. Felt pads are consumable; they compress, collect grit and fall off, and a pad with grit embedded in it is worse than no pad at all.

Which protector suits which floor?

  • Wood and laminate – felt pads for static furniture, soft rubber or polyurethane castors for anything on wheels.
  • Vinyl and LVT – wide, soft plastic protectors. Avoid rubber, which reacts with vinyl and causes permanent yellow staining.
  • Tile and stone – felt or soft plastic, mainly to prevent scratching the glaze or the polish.
  • Carpet – wide cups or coasters to spread the load, since narrow feet crush the pile permanently.

The general principle is to spread the weight over the largest area the furniture allows.

Why do office chairs cause so much damage?

Because they combine constant movement with small, hard castors, and standard office chair castors are made for carpet. Used on a hard floor they scratch, and they wear into a groove in a traffic pattern over time.

Soft polyurethane castors designed for hard floors are an inexpensive swap and make a substantial difference. A chair mat is the alternative, though it needs to be the right type: a mat made for carpet has spikes on the underside that will damage a hard floor.

How do you prevent indentations?

By spreading the load. A heavy item on four small feet concentrates enormous pressure at each point, and vinyl, cork and softwood all take permanent dents from it. Wide protectors, or a sheet of ply under a very heavy item, distribute the weight.

On carpet, move heavy furniture a few centimetres every few months so the pile is not crushed in exactly the same spot indefinitely. Shallow dents in carpet often lift with steam from an iron held above the pile and a gentle brush afterwards.

What about rugs and mats?

Use a breathable underlay rather than solid rubber. Solid rubber traps moisture against a wood floor and can mark a finish, and on vinyl it causes discolouration. A waffle or mesh underlay allows air movement and grips just as well.

Move rugs occasionally, because a floor exposed to daylight will fade around a rug and leave a visible outline when it is eventually lifted.

How should furniture be moved?

Lifted rather than dragged, with two people if needed. For anything too heavy to lift, furniture sliders under each corner let it glide without contact between the leg and the floor. Never drag anything with metal feet across a hard floor, and check underneath for anything that has become embedded in a felt pad before you start.

Clear the route first, and check the floor along it. Most of the floor damage that happens during a house move is caused by something small and hard lying on the floor at the wrong moment rather than by the furniture itself.

How often should protectors be checked?

Twice a year, and whenever a chair starts to feel as though it is catching rather than gliding. Turn each piece over, peel off the old pads, clean away the adhesive residue and any embedded grit, and fit new ones. It takes about half an hour for a whole house and a packet of pads costs very little, which makes it one of the cheapest pieces of preventative maintenance available in a home.

More Floors guides · All Rooms guides