A bread maker is straightforward to clean with one significant exception. The kneading paddle sits on a spindle in the base of the pan, and that spindle has a bearing and a seal underneath it. Water getting into that assembly, or dough left to harden around it, is the most common reason a bread maker fails.
What is the routine after each loaf?
- Unplug the machine and let it cool.
- Take the pan out and remove the paddle while any residue is still soft.
- Wipe the pan out with a damp cloth or wash it quickly in warm soapy water.
- Wash the paddle separately, clearing dough from the hole in its centre.
- Wipe the baking chamber and the lid once cool.
- Dry everything thoroughly before reassembling.
Why should the pan not be soaked?
Because the spindle assembly in the base has a bearing and a seal, and prolonged submersion lets water past it. The bearing then corrodes or seizes, the paddle stops turning freely, and eventually the pan leaks.
Most manufacturers state the pan should not be immersed. Wash it quickly with a soapy cloth instead, or fill it with warm water for ten minutes without submerging the outside, then tip it out and dry it.
What if the paddle is stuck?
A paddle that has baked into the loaf or seized on the spindle is common. Fill the pan with warm water and leave it for fifteen to twenty minutes, which softens the dough, then twist the paddle free.
Do not lever it off with anything metal, which damages the non-stick and the spindle. If it will not move after soaking, repeat rather than forcing it.
Once free, clean the spindle and the underside of the paddle thoroughly, and a smear of cooking oil on the spindle before the next loaf helps.
How do you protect the non-stick?
- No metal utensils for removing the loaf or the paddle.
- No abrasive pads or powders.
- Remove the loaf promptly, since a cooling loaf sticks harder.
- Do not use the pan for anything else, such as mixing or storage.
- Replace the pan rather than persevering once the coating has failed.
Pans and paddles are available as spare parts for most machines, and a new pan is far cheaper than a new bread maker.
How do you clean the baking chamber?
Let it cool completely, then brush or vacuum out loose crumbs and flour. Wipe the walls and the heating element area with a barely damp cloth, keeping liquid away from the element itself.
Never pour water into the chamber and never immerse the machine. A soft brush is the main tool here.
What about the lid and the window?
The lid usually lifts off or unclips for washing on some models, and on others it is fixed. Wipe the inside with a damp cloth once cool, and clean the viewing window with a glass cleaner applied to the cloth.
Check the steam vent is clear, since a blocked vent affects the crust.
What about the dispenser?
Machines with an automatic fruit and nut dispenser need that emptied and wiped after every use, since sticky ingredients such as dried fruit gum up the flap and it stops releasing properly.
What causes most problems?
Soaking the pan, which kills the bearing. Leaving the paddle in place until the dough has set hard. Using metal tools on the coating. And storing the machine with the pan in place while still slightly damp, which encourages corrosion around the spindle.
Store the pan out of the machine with the paddle removed, once everything is dry.
How do you deal with flour dust?
It gets everywhere, settles in the chamber and around the lid hinge, and combines with steam into a paste. Brush it out dry before it gets damp rather than wiping, which turns it into glue. A soft brush and a vacuum crevice tool held near rather than pressed against the surface handles most of it.