How Do You Clean Behind and Under an Oven?
The gap beside and behind a cooker collects everything that falls down it, and in most kitchens it has not been touched since installation.
Appliances mostly fail for want of cleaning rather than for want of repair, and worktops are ruined more often by the wrong cleaner than by wear. These guides cover the machines that need descaling or a maintenance wash, the ones that quietly stop working properly when a filter is blocked, and which cleaners are safe on which surface - because the answer for granite, laminate, wood and stainless steel are four different things.
The gap beside and behind a cooker collects everything that falls down it, and in most kitchens it has not been touched since installation.
The texture that stops you slipping also holds dirt, and a smooth mop passes straight over the top of it.
The smell comes from the underside of the rubber splash guard, which is the one part the grinding never touches.
A juicer has to be cleaned immediately or not at all, because dried pulp in a fine mesh filter is close to impossible to remove.
Standing water in the base is usually a blocked filter or a blocked sink waste, and both can be dealt with in half an hour.
Behind a washing machine are the hoses, and checking them while you are cleaning is worth more than the cleaning itself.
Five degrees or below for a fridge and minus eighteen for a freezer, and the dial on most fridges is a setting rather than a temperature.
A grill pan is the single greasiest item in most kitchens and also the one most often put away without being properly cleaned.
Acid dissolves limescale and damages both natural stone and cement grout, which makes where you put it as important as what you use.
The right treatment depends entirely on whether the surface is porous, and using an acid on stone makes a stain into permanent damage.
The parts wash easily and the machine itself needs attention in two places most people never look: the beater shaft and the underside of the head.
A blocked jet leaves one section of the load dirty while everything else comes out fine, which is the clue that points straight to the spray arms.